Pharmacists · v2.4
Pharmacy
Giving medicine out is in every plan. Taking deliveries in and counting the shelf need the pharmacy department.
Watch the whole task: A counter sale, and the strip coming back (40 s)
Give medicine to a patient
Pharmacy › Dispensing
Watch it done (34 s)
Two parts: who it is for, then what they are getting.
- Choose For a patient of this clinic and pick them under Seen today or search for them, or Counter sale (no patient) for a buyer who was never seen here.
- The Prescription Number is optional. Type it if you have one.
- A medicine that needs a prescription asks for two things before it can be sold: the buyer’s name and who prescribed it. At the counter that is Prescription from, for a doctor at another hospital.
- For each line, type how many you actually gave, not how many were written. Gave fewer? Pick the Reason not dispensed.
- The price on each line is the price the bill will use: each batch’s MRP, soonest expiry first.
- Under Instructions, tap a quick pick such as 1-0-1, After food or When needed, or type your own. From a prescription they are filled in for you.
- Add a discount or a note if you need to, then press Dispense.
The oldest stock is used first, automatically, so nothing expires behind newer boxes. You do not have to pick the batch.
A line priced above its MRP shows a red warning. Nothing is sold above MRP: lower the medicine’s selling price, or correct the batch MRP on the Stock page, first.
Typing what was actually handed over is what keeps the shelf count honest. A line left unfilled would otherwise make the system disagree with the cupboard.
A prescription from your doctor
PharmacyWhen a doctor here writes a prescription in the system, it comes to you. You do not type it again.
- When the doctor signs it, everybody who works the pharmacy at that site gets a notice: Prescription to dispense, <patient> has a prescription waiting. Opening it takes you to Pharmacy › Dispensing. A prescription still being written sends nothing.
- The Pharmacy page lists them under Waiting to be filled: every signed prescription from the last two days not yet handed over, oldest first. The list refreshes by itself every 25 seconds. The dashboard shows the count as To dispense.
- Press Fill it. The patient, the medicines and the instructions are already filled in. Change Given where you hand over less than was written, then press Dispense.
- While the visit is still open, the medicines go on that visit’s bill, the same bill the consultation fee and any other charges go on. Not a separate pharmacy bill. If the visit was already finished, they join that visit’s bill while nothing has been paid on it. If it has been paid, they get their own pharmacy bill, ready to be paid; the desk can print the two together with Print visit bills.
- Pressing Dispense twice, or two people at once, never bills twice.
A paper prescription does not appear in this list. Choose the patient yourself, from Seen today or the search (see the next step), so the medicines still go on their bill.
Who takes the money: by default the billing counter. A clinic that wants the pharmacy to take it gives the Pharmacist role billing permission under Settings › Roles, or makes a new role for a pharmacy cashier there.
One bill for a walk-in
Pharmacy › DispensingA patient seen today whose doctor wrote on paper has no prescription in the system. Choose the patient anyway: that is what puts the medicines on the same bill as the consultation fee.
- Under Seen today you see everybody checked in, in a visit or holding an unpaid bill at your site today. One tap chooses them. Not there? Search below it.
- Press Dispense. The green box tells you where the charge went, for example Added to INV-202610-000123, today’s visit bill. The consultation fee goes on the same bill. The patient pays the desk once, for both.
- Separate pharmacy bill INV-… means the patient had no open visit or unpaid bill here today, or it was already paid. Press Take the money for it as usual.
- Choosing Counter sale (no patient) shows: No patient chosen. These medicines will go on a separate pharmacy bill and cannot join the patient’s visit bill. Press Go back and choose the patient unless the buyer really was never seen here.
Sold as a counter sale by mistake? Before anything is paid, the desk can open that bill and press This was for a patient. It then shows among the patient’s bills, but stays a separate bill.
Print the bill and how to take it
Pharmacy › Dispensing › open a saved oneThe saved dispensing shows each line with its instructions and, for anything not given, the reason.
- Press Print bill and instructions.
- One A4 sheet: the bill in your hospital’s chosen print style, and below it How to take your medicines, one line per medicine.
Take a delivery in
Pharmacy › Purchases › NewWatch it done (43 s)
Type the supplier’s own bill, line by line, exactly as printed.
- Each line: batch number, expiry, quantity, free quantity, rate, discount, GST, MRP. Rate, MRP, GST and discount take decimals, such as 12.75.
- It saves as a draft. Nothing has moved yet.
- Type the total the supplier printed and check it matches yours.
- Only then press Submit.
Submit is what puts it on the shelf. Until you press it, the delivery exists on paper only.
What a delivery does to your prices
- The medicine’s cost becomes what this delivery cost.
- Its selling price moves to the new MRP when it was empty, was the old MRP, or would now be above the new MRP. A price you set below MRP on purpose is kept.
- After Submit, a message lists every selling price that changed, old and new.
Made a mistake? Open the delivery and press Reopen for correction. You cannot reopen one once that medicine has been given to somebody — the history is real by then.
Count the shelf
Pharmacy › Stock and placesWatch it done (21 s)
Count the real boxes first, then tell the screen what you counted.
- Pick a medicine and a place. Places (the main store, a ward cupboard) are set up at the top of the page: counting by place appears once there is one, and Move some once there are two. A single-counter pharmacy can skip places and use Quick stock update below.
- Type your count. The screen shows where it disagrees.
- Stock with no batch recorded is listed separately — that is old stock, not a loss.
- Quick stock update sets a medicine to the number you counted on the shelf, and keeps the change in its stock history.
- Adjust adds or takes away a quantity with a reason, such as damaged or found.
Batches and prices
- Pick a medicine to see its batches. Stock with no batch says so, with a Give them a batch button: type the batch number, expiry, quantity, MRP per pack, units per pack and cost. Nothing is counted again.
- A batch with the wrong MRP or cost? Press Price beside it and correct it.
- Both move the medicine’s selling price by the same rule as a delivery.
Export CSV on the Pharmacy page downloads the stock. Stock without a batch is one No batch row per medicine, so the file adds up to the screen. Cost and margin columns need permission to see what you pay suppliers.
When medicine comes back
Pharmacy › DispensingWatch it done (21 s)
A strip returned over the counter, or expiry going back to the distributor.
- Say, per line, whether it can be sold again.
- Only what you mark saleable goes back on the shelf.
- It is credited either way — it came back.
- The refund is the value less your deduction. Set your usual percentage once in Settings (for example 20). On each return you can change it to another percentage, a fixed amount in rupees, or 0 for a full refund. The screen shows value, deduction and refund before you save.
Nothing can tell whether a strip spent the afternoon in a hot car. You can. That is why the decision is yours and not a default.
Say which of your stock is Schedule H
Pharmacy › Drug schedulesSchedule H, H1 and X decide what you may hand over and what you have to record. No supplier export carries them, so the field starts empty on every product you import. This screen fills it in a morning instead of a project.
- It reads each medicine’s generic name and suggests a schedule, showing the name it matched on. You check the reasoning, not just the answer.
- Nothing is applied on its own. Take the suggestions on screen fills the boxes; they are saved only when you press save.
- Anything it cannot place says Not determined. That does not mean unscheduled — it means nobody has said yet, and you should.
- Once set, the schedule shows at the dispensing counter beside the medicine, where the person handing it over can see it.
- Saving a schedule also marks the medicine as needing a prescription.
The legal list is the Gazette notification, not this software, and it changes without telling us. These are suggestions a pharmacist confirms. The H1 register itself — naming the prescriber and patient, kept three years — is not built.
Tidy an imported catalogue
Pharmacy › Tidy catalogue
Watch it done (36 s)
A list that came from a spreadsheet often has the wrong product type and empty tax columns. This screen finds those rows and corrects them in place.
- Filter by type, by whether it needs a prescription, or by what is Missing: generic name, HSN code, GST rate, MRP or schedule.
- Change one row in its own boxes: type, needs prescription, schedule, HSN, GST. Each change saves as you make it.
- For many at once, tick the rows (or Select all that match), then use Set type, Needs prescription, No prescription or Set GST.
- Tags are your own labels, such as a department or a drug class. Type one beside the bulk actions and use Add tag or Remove tag on the ticked rows, then filter by it here, on the medicine list and on Stock and places. A tag that matches an existing one ignoring capitals takes the existing spelling.
A medicine with a schedule always needs a prescription. Asking for both is refused, and the row stays as it was.
Load your stock when switching from another system
Pharmacy › Stock and places › Upload opening stockWatch it done (35 s)
Load your medicines first, then load what is on the shelf from one CSV file, one row per batch.
- Press Download the template. Columns: code, name, batch, expiry, quantity, cost_per_unit, mrp, units_per_pack, tags. Separate several tags with ; or |. Tags are only added, never removed. Most export headings like Batch No, Exp, Qty or P.Rate are read too.
- Quantity is loose units on the shelf, not packs. Cost is per unit. MRP is per pack. Expiry can be 08/2027, 08/27, 2027-08 or 31-08-2027.
- Choose the file. The screen shows each medicine now and after, and every row it could not match or read. Nothing is saved until you press Apply.
For each medicine in the file, the file is its whole stock at this branch: batches you leave out go to zero. Medicines not in the file are not touched. Loading the same file twice changes nothing.
Medicine handed over, she moves to To pay — which is where Money picks her up.